Put away the plunger. This thick gel cuts through
standing water and works triple duty to dissolve
tough clogs, prevent new ones from forming, and remove unpleasant odours.
Put away the plunger. This thick gel cuts through
standing water and works triple duty to dissolve
tough clogs, prevent new ones from forming, and remove unpleasant odours.
All septic systems and pipes, including PVC, plastic,
copper and old pipes.Slowly pour 1/5 of the bottle (2 cups) down the drain.
For the really rough clogs, use the entire bottle.
Let it sit for 15 minutes, or in the case of standing water,
until the drain is clear. Liquid-Plumr® Full Clog Destroyer™
won’t harm pipes if left overnight.
Now that your clog is dissolved, flush away any
leftover gel with hot water. It’s that easy.
For garbage disposals, follow the same usage directions
and flush with the disposal running. Avoid all splashing.
All septic systems and pipes, including PVC, plastic, copper and old pipes.
Keep out of reach of children. Harmful if swallowed. Avoid splashing. Injures eyes, skin and mucous membranes on contact. Do not use with ammonia, toilet bowl cleaners or non–Liquid-Plumr clog removers, as splashing or the release of hazardous gases may occur. Clean up any spillage immediately.
This may happen when a partially dissolved clog
gets lodged further down the pipe. We recommend
trying another bottle of this product. However, if
the problem continues to persist, you should call a
plumber, as there are some plumbing situations
that even Liquid-Plumr cannot fix.
Wait at least 15 minutes after pouring this product
down the drain before flushing with water. If you
have an especially difficult clog, you can safely let
the product sit overnight.